TI E2E Community
Wireless Power Forum
Gerber files for the reference design in the BQ500110EVM
We bought an evaluation kit for the BQ500110EVM, and we are trying to find the gerber files without succes. The link that we were used to refer to these files was the following:
this web page does not work anymore. Could we please have the link to get the gerber files and all related data.
The bq500110 has been replaced by the bq500210 device.
EVM for bq500110 has been removed from the web and stock.
I can send you gerber files but if you are looking at a design you should switch to bq5000210.
Bill Johns, Applications Engineer
bqTESLA Wireless Power Products
Texas Instruments Inc
We definitively need the gerber files for the bq500110 since we will start a production based on the 500110 chip. It is important for us to keep all the data related to the refrence design.
We would appreciate that you provide us with the files required.
Thanks for your support
Gerber files for bq500110EVM-688A attached.
My name is Roger and i work with Robert on the same project and on the gerber files for bq500110EVM-688A you sent to him they miss some files. The paste file (for stensil), the X and Y file and PCB database in ASCII format. Can you help us for that?
Thank you for your help.
The design files for bq500110EVM-688 are in PADS. Attached are the ASCII version of the schematic and layout, it may be possible to import them.
I have attached additional files.
We do not generate the stensile, this is done by our CM.
8468.HPA689A additional fab - assembly files.zip
The folders for bqTESLA kits have been turned back on, see:
Also a folder for the bq500110EVM-688 has been set up, see:
Gerber files are in this folder.
But the bq500110 is not recommended for new design it is replace by bq500210.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.