Hello,
I would like to add ~2ft of distance between the coil and the bq500210evm. Can you advise how to match impedence and minimize power loss?
I also need to add an extension, Andrew.
I imagine extension capacitance and any skin effects will be of concern; Litz wire needed?
I read Tang & Sullivan's "Stranded Wire ...as Low-Cost Alternative to Litz Wire" , 2003 IEEE. That may help.
Anyone?
Making a twisted pair of multistrand wire will work. No special matching is needed on these frequencies.
If you have the Litz wire you can make a twisted pair from it too. Litz wire is the better choice.
Regards,
Vladimir