TI E2E Community
Wireless Power Forum
bq51013 several boards differences
I have build up several receiverboards with the bq51013. Though there are no differences in the assambly and pcb-board,
ther are differences in output voltage and current. I need an output of min 4.8V at 0.8A . I just can reach this value with only
one board. Is there any suggestion what I can do? Any idea of what's the reason of that?
Thanks for your help
Some possible items to look at:
1.) Is the problem thermal, bq51013 is overheating and shutting down? If this is the problem the bq500210 TX will stop power transfer and display a red fault LED. 013 is sending End Power Transfer (EPT).
2.) Communications issue between 013 receiver and 210 transmitter at higher current outputs? If the transmitter does not receive a valid communication from the receiver for 1.5S it will shutdown and attempt a restart. You may try increasing the communications capacitors (C13 and C22 on EVM) from 22nf to 68nf.
3.) Is the receiver coil tuned correctly? The values of Cs (C1, C2 and C3) need to be changed to match the coil. See data sheet for tuning instructions.
4.) Is the receiver coil suitable for 1A output current? I have seen coil designs that work well at lower currents such as 500mA but have efficiency and communications problems as load is increased.
Bill Johns, Applications Engineer
bqTESLA Wireless Power Products
Texas Instruments Inc
do you know is there any chance to get an output power up to 10W. TI had announced a solution for higher output power than 5W.
Is there any chance in near future?
We do not have any released 10W solutions and nothing in the near future.
Contact you local TI representative for more info regarding product road maps and information on pre-release parts.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.