This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ51050 charge termination reality check

Hello, this is my first foray into wireless power and I have the BQ51050 working quite well but I wanted to have a quick review of my schematic before I took a chance that the charge circuit might not terminate the charge correctly. 

Can you please take a look at the attached implementation and let me know if I have setup for a proper termination given that the battery is a 2500mAh LiPo cell?  The battery does not contain a thermistor.

Please let me know if you need additional information.

Thank you,

DougM