• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 61 subscribers
  • Views 441 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Question of BQ500412,FOD Compatibility ?

Eddy Lee
Intellectual 840 points
Other Parts Discussed in Thread: BQ51013B, BQ500412

Hello,

I have a question and need your help & comment below it.

BQ500412 design Win, but FOD have some problem issue Rx unit(ex. SAM S6 edge, Sony), and other Rx unit(ex.made by BQ51013B) is good.

Pls Send us comment FOD_CAL, Resistor value and Other check point at Debugging ? 

Pls review attached BQ500412 schematic and load threshold data at Problem Rx unit test. 

 

Best regards

Eddy Lee5826.BQ500412_schematic.pdf

  • 0
    Intellectual 840 points

    Hello,

    We try to test again and received good result.

    We think,problem cause is center align.

    But customer Tx cradle is vertical type(ablut,60 degree) and we will try to FOD debugging at TUV korea.

    If you have a comment, please let me know. 

    Thanks.

     

    Eddy