This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Checking my design which includes several TI's products

Other Parts Discussed in Thread: BQ51221, DRV2605L

Dear Sir/Madam

Hi, I have finished my schematic which I used several TI's products in it and I would like to double check it to make sure I thought about everything before I start my PCB. I also studied your documents and application notes which are related to my selected components and I used your forum as well.

My question is, regarding to my design can you check my design as well?

I also would like to know how I can create a private case (for Q&A) which I could be in contact with your support as well as the questions and answers are visible ONLY to me?

I look forward to hear from you.


Yours Sincerely,

Majid

  • Majid,

    I would be glad to assist with the wireless power review.  Do you have any specific questions we can help with?  If needed, we can do this is an off-line private conversation.

    Regards,

    Dick

  • Dear Dick

    Thank you for your response. Yes I need to have a private communication to check my design. The device which I designed has the following chips:

    EZR32WG330F256R68G from Silicon Labs

    RF6569 from RFMD

    LP3855EMP-ADJ from TI

    BQ24030RHL from TI

    LP3982ILD-ADJ from TI

    BQ51221 from TI

    BMA250 from  Bosch

    DRV2605L from TI

    Please let me know how we can establish a private channel and what should I send to you? (I am using Altium Designer)


    Cheers,

    Majid

  • Dear Dick

    Hi, what I am looking for is to check my schematic and PCB for TI's components which I used in my design. How we can do this and communicate in private?

    I look forward to hear from you soon.

    Regards,
    Majid