This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TMDSLCDK6748
I am using a TMDSLCDK6748 evaluation board. I want to configure the SPI communication in the board using SPI0 communication. But only the SPI0_SIMO, SPI0_SOMI and SPI0_SCLK pins are available in the J15 there is no chip select pin out from any of the output jumpers. They seem to be connected to the LAN IC, U23, LAN8710A-EZK. SPI1 communication is available and seems to be connected to the camera header.
Please suggest a way to use the SPI communication in the board.
with regardsHarikrishnan R S
.Thank you .
SPI0_ENAn/EPWM0_B/MII_RXDV; SPI0_SCSn_5/UART0_RXD/MII_RXD3 and SPI0_SCSn_4/UART0_TXD/MII_RXD2 are available on the expansion headers.
You need to correctly pinmux C17, C19 and D18 balls of the TMS320C6748 device:
Then see page 11 of the schematic:
You need to populate R214 through R219 to physically connect the device ball to expansion header. After that you can use J15.P21, J15.P23, J15.P25, J15.P27, J15.P29, J15.P31 for SPI communication.
Best Regards, Yordan
Please make sure you read the forum guidelines first.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Yordan Kovachev:
In reply to Harikrishnan R S:
The camera interface is J16. See the schematic. What do you mean by pin headers for interfacing with J16?? Best Regards, Yordan
I have populated the resistors, but the output signals are getting distorted in those pins.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.