This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Using McAsp FIFOs on C6747
Part Number: OMAP-L137
I am targeting the OMAP-L137 evaluation board. I've created a bare-metal (no OS or TI libraries) McASP loopback test. I have enabled the FIFOs, and setup the registers to read and write 8 slots at time on one transmitter and one receiver.
I first tried to setup a 16-slot frame, where the first 8 slots were transmitter slots; and the remaining 8 slots were receiver slots. This didn't work. The data I read back from the FIFO was always 0. Where each word that was transmitted was one greater than the previous.
When I changed it to an 8-slot frame, with the transmitter and receiver both enabled on all 8 slots, it worked as planned.
So my question is a matter of understanding how to setup frames and slots. It's my understanding that, in addition to the steps to setup the working case, if I change:
I would have setup a 16 slot frame where the where the transmitter is only active during the first 8 frames, and the receiver is only active during the remaining 8 frames.
What am I failing to understand?
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.