This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

Linux/TMDSEVM437X: Does VSS_RTC(pin AD4) need to connect to ground?

Part Number: TMDSEVM437X

Tool/software: Linux

Hi,

    I found that the VSS_RTC(pin AD4) seems not to be connected to Ground  on page2 of schematics Rev 1.4A,  In my design,I will also use a crystal 32.728khz,does the  pin  AD4  need to be connected to Ground?

Best wishes!

Jianhua Yuan 

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.