This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TMDSLCDK6748
Tool/software: Code Composer Studio
I'm using CCS Version of 8.0.0.00016 on Window 10 64 bit and TMS320C6748.
I've some questions.
1. how to generate .bin file from .out file on CCS8.
only the tool of "AISgen for D800K008" after loading "LCDK_AISGen_Config.cfg" ?
2. how to download .bin file to NAND or MMC/SD in target(ex LCDK6748) with CCS8.
only through UART interface using "sfh_OMAP-L138.exe" after UART boot ?
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
Sahin OkurApplications Engineer
In reply to Sahin Okur:
OK, I see.
You mean that there is nothing special with/on CCS8
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.