[FAQ] PROCESSOR-SDK-DRA8X-TDA4X: How do I get started with writing software for the MCU safety island on DRA8X / TDA4X?

Danny Jochelson

Part Number: PROCESSOR-SDK-DRA8X-TDA4X

I would like to start writing software for the MCU safety island on DRA8X / TDA4X. How do I get started writing software for this platform?

over 4 years ago

0 Danny Jochelson over 4 years ago

TI__Intellectual 870 points

Texas Instruments provides AUTOSAR/MCAL drivers and example demonstrations as part of the MCU software package. This package can be obtained as part of the Processor SDK RTOS Automotive package, and its documentation can be found here.

Once the Processor SDK RTOS Automotive package has been installed, the MCU software is contained within the "mcusw" directory in this package.

To utilize this MCU software, refer to the MCU Software User Guide and the MCU Software Release Notes.

In systems where AUTOSAR is not hosted on MCU Safety Island, Texas Instruments provides TI RTOS based & Baremetal drivers as part of PDK package. This package can be obtained as part of the Processor SDK RTOS Automotive package and it’s documentation can be found here.

0 Alex Bashkov over 4 years ago

TI__Genius 13175 points

As a side note, you should also refer to the device Technical Reference Manual (TRM) here: https://www.ti.com/product/TDA4VM/technicaldocuments

thanks,

Alex

Processors

Processors forum

[FAQ] PROCESSOR-SDK-DRA8X-TDA4X: How do I get started with writing software for the MCU safety island on DRA8X / TDA4X?