For IWR6843 device ,I read the PC_mss_68xx project or the PC_dss_68xx project, I can't find where I can inti the Chirp parameters in the code , please guide me how to init it.Thank you !
in the people counting lab, the chirp parameters are specified via the profileCfg CLI command in the CFG file. The MSS project implements the CLI.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to AmandaN:
Thank you for your replay, dear Amanda ! Can you tell me which line of the code in the program(for example, for the PC_mss_68xx project) indicates that the parameter profile(mmw_pplcount_demo_default.cfg) is being invoked?
In reply to user6056030:
The GUI sends the configuration file to the device. This is where you will find code that selects the configuration file. Line 61 in setup.m sets the default config value.
In reply to Justin Curewitz:
Is there a similar reference method(invoke XX.cfg) in the clc. C file ? You see in the C:\ti\mmwave_sdk_<ver>\packages\ti\demo\xwr68xx\mmw\profiles, there is a profile_2d.cfg , I want to know how clc.c invoke it ? Thank you !
Each command is sent over UART. When the command is received, the software associates the command with a specific function and calls that function. Please look at cli.c and cli_mmwave.c to see the functions and what they do. These are in the SDK at
You can write a function that calls either the cli commands, or use the function calls inside the cli commands to initialize the device.
Thank you very much, Dear Justin !!
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.