Looking for an RF transceiver design solution between 1GHz to 2GHz

Jin Chen80

Other Parts Discussed in Thread: TRF3722, TRF372017, TRF3705, ADC32RF80

Hi Ti,

I'm looking for an RF transceiver design that operates between 1 to 2 GHz capable of wide band modulation and MIMO. Please let me know if TI offers such transceiver, or components that can be connected together to design a custom transceiver.

Thanks,

over 5 years ago

0 Kang Hsia over 5 years ago

TI__Guru 66004 points

Hi Jin,

On the modulator solution for downlink, you may take a look at the TRF3705, TRF3722, and TRF372017 solutions, which can support baseband input bandwidth of 900MHz to 1GHz of input.

If you need higher bandwidth support, you may need to look at our RF sampling data converter solutions like the ADC32RF80 and DAC39RF80 family for uplink and downlink solution. Here is the web page that you may learn about our RF sampling data converters:
www.ti.com/.../rf-sampling.html
-Kang

0 Jin Chen80 over 5 years ago in reply to Kang Hsia

Prodigy 40 points

Hi Kang,

Thank you for the guidance. Do you have transceiver reference design or app notes using TRF37XX modules you could share?

Thanks,

0 Kang Hsia over 5 years ago in reply to Jin Chen80

TI__Guru 66004 points

Hi Jin,

Here are a couple TIDAs:

you may reference the following EVM:

0 Jin Chen80 over 5 years ago in reply to Kang Hsia

Prodigy 40 points

Thank you so much. Could you also recommend any base-band processor for these designs?

Best,

0 Kang Hsia over 5 years ago in reply to Jin Chen80

TI__Guru 66004 points

Hi JC,
Our customers typically use FPGA to interface to our data converters. Look for these reference designs/EVMs
www.ti.com/.../TSW14J56EVM for Altera solution
www.ti.com/.../TSW14J10EVM for Xilinx solution
-Kang

0 Jin Chen80 over 5 years ago in reply to Kang Hsia

Prodigy 40 points

Thank you!

RF & microwave

RF & microwave forum

Looking for an RF transceiver design solution between 1GHz to 2GHz