• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 9 subscribers
  • Views 233 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TBWA2/40dB

Nidhi Arora
Prodigy 110 points

Hello everyone,

Had a query regarding wideband amplifier. If I connect TBWA2/40dB (Tekbox make) amplifier in reverse direction that is RF IN is connected in place of RF OUT what will happen to amplifier?

NOTE- there is a green LED indicating that it is ON but Amplifier is not working .

Regards,

Nidhi Arora

  • 0
    TI__Mastermind 18065 points

    Well, that device is not a TI product so it is difficult to comment.  In general it depends on the amount of power delivered to the output and the sensitivity of the amp.  If the signal is low power, then the amplifier is probably still OK.  If you have a way to monitor the current, then a too low of current may indicate the amplifier is blown.

    --RJH