TI E2E Community
RF & Digital Radio
/etc... RF Forum
CC2540 BLE Stack size
I am evaluating the CC2540 for a BLE application and want to know roughly how big the BLE stack is for a point to multipoint application in terms of Flash & SRAM and processor resources for a low duty cycle application (sending packets once every minute or so). The rest of the application requires a reasonable amount of resources (colour lcd etc) and I want to check whether a single chip solution is possible with the CC2540
The simpleBLEPeripheral demo app, which is probably close to what you need, takes ~110k of FLASH and just under 7K of RAM,
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.