• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 681 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Starterware/FDC1004EVM: FDC1004EVM firmware problem (Win 10)

YiAn Zhu
Prodigy 10 points
Part Number: FDC1004EVM

Tool/software: Starterware

Hey,

Recently I have got an FDC 1004 EVM Liquid sensor and I am trying to test it.

I've downloaded the firmware from TI official site but when I plug in the FDC 1004 EVM, there is no reaction at all. Btw my PC is currently operating under Win 10.

Also, I doubted whether I have downloaded in the correct way because I cannot properly open the firmware.

  • 0
    TI__Expert 8050 points
    Hi YiAn,

    When you say "there is no reaction", is it the EVM with the original firmware or after you update the firmware? If you have not updated the firmware, do not use the current version as we will have a new version next week.

    Does the EVM show up in Device Manager? Does it work on another PC?

    Regards,
    Yibo