FDC2212: SD pin internal

Hirotaka Inoue

Intellectual 2980 points

Part Number: FDC2212

Hi support member,

For SD pin, Is ESD diode connected in device?

Is any pull up or down connected in device?

Regards, Hirotaka Inoue

over 6 years ago

0 Luke LaPointe over 6 years ago

TI__Genius 13335 points

Hello,
All pins have ESD protection and pass ±2kV HBM and ±750V CDM. This info can be found in the FDC2212 datasheet in section 8.2 ESD Ratings.
The SD pin does not have any pull ups or pull downs. It should be externally tied low for active mode or tied high for shutdown mode.
Regards,
Luke

0 Hirotaka Inoue over 6 years ago in reply to Luke LaPointe

TI__Intellectual 2980 points

Hello Luke-san,

Thanks for your answer.

Regards, H.Inoue

Sensors

Sensors forum

FDC2212: SD pin internal