This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: LDC1612EVM
I cannot connect the GUI anymore after upgrade firmware. This EVM can work for origrinal firmware, how can I downgrade origrinal firmware?
Sensing Solutions EVM GUI Tool v1.9.1 (Rev. B) (ZIP, 61266KB) 04 Nov 2016
OS: Windows 7 -64bit
In reply to Varn Khanna:
Hi Varn Khanna
My EVM version is Rev B. The firmware as I download from TI website as below.
In reply to Jimmy Chen61:
Please download the latest version of the sensing solution GUI and a compatible firmware file should be located in the GUI's installed location which is usually:
C:\ti\Sensing Solutions EVM GUI-1.9.1\EVM Firmware
You can upload the firmware by using Sensing Solution EVM GUI's, firmware upload page.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.