Hello,
I'm developing with LDC1614 EVM board for interation as indutive sensor. My question is I need infomation of log file from LDC1614EVM.
This is what I got from continus log data with channel 0 and 1.
To analyse that data, what should I look? LDC1614 Firmware code? And I don't know how to look that file. And what extension file for that.
This is URL that I got LDC1614 Firmware code code.
www.ti.com/.../LDC1614EVM;tisearch=Search-EN-Everything
Thanks,
Anton.
Hello Anton,
The logged file can be saved in .txt or .csv formats.
As pointed by you, the logged information meaning is correct. You can use continuous data logging mode to capture data over certain time instead of single log data.
You can find more information regarding this below:
We are working on uploading the source code on the website. This should happen in 1-2 weeks of time.
In case you need it immediately, I can provide it to you offline.
Please let me know if you require any information.
-Best Regards,
Suhas R C
Hello Suhas,
How are you? You're code could help's a lot for interating LDC1614 to our MCU. But I need some instructoion to use that.
First of all, I need to explain what I would to do. I'm using LDC1614 for sensing Card swip motion with LDC1614 raw data. That data shows as below.
What I need is to detect large different of channel and I can analyze with continous raw data.
In next step, I want to check how to send that data to our main MCU(Nordic BLE chip) by I2c interface.
In your sample code, I don't have idea to check that process. Can you give some information.
- LDC1614 raw data form code.
-I2C communication between LDC1614 and MSP430.
I know it is hard to explain by letter. Let me know if you need additional information.
Best regards,
Anton.
