LDC1612EVM: LDC1612 EVM disconnection

Jimmy Chen61

Part Number: LDC1612EVM

I cannot connect the GUI anymore after upgrade firmware. This EVM can work for origrinal firmware, how can I downgrade origrinal firmware?

Sensing Solutions EVM GUI Tool v1.9.1 (Rev. B)
(ZIP, 61266KB) 04 Nov 2016

LDC1612EVM Firmware
(ZIP, 15KB) 16 Dec 2014

OS: Windows 7 -64bit

over 6 years ago

0 Varn Khanna over 6 years ago

TI__Intellectual 2725 points

Hi Jimmy,

What rev of the EVM do you have? is it Rev A or Rev B?

Where did you find the "new" EVM firmware? All the supported firmware files should be located in the following directory:

C:\ti\Sensing Solutions EVM GUI-1.9.1\EVM Firmware

Ensure that you have the correct Rev of the EVM.

Regards,

Varn.

0 Jimmy Chen61 over 6 years ago in reply to Varn Khanna

Intellectual 420 points

Hi Varn Khanna

My EVM version is Rev B. The firmware as I download from TI website as below.

http://www.ti.com/tool/LDC1612EVM?keyMatch=LDC1612&tisearch=Search-EN-Everything

Thanks

0 Varn Khanna over 6 years ago in reply to Jimmy Chen61

TI__Intellectual 2725 points

Hi Jimmy,

Please download the latest version of the sensing solution GUI and a compatible firmware file should be located in the GUI's installed location which is usually:

C:\ti\Sensing Solutions EVM GUI-1.9.1\EVM Firmware

You can upload the firmware by using Sensing Solution EVM GUI's, firmware upload page.

Regards,

Varn.

Sensors

Sensors forum

LDC1612EVM: LDC1612 EVM disconnection