WEBENCH® Tools/LDC0851: LDC0851 with coil designer

Hirotaka Matsumoto

Part Number: LDC0851

Tool/software: WEBENCH® Design Tools

Hi all

Would you mind if we ask LDC0851 with coil designer?
On the webench, when we select print, it shows the same figure(as the attachmentfile) in spite of different result.

20180222_LDC0851.pdf
Is this software bug?
If you have some advice, could you let us know?

Kind regards,

Hirotaka Matsumoto

over 6 years ago

0 Luke LaPointe over 6 years ago

TI__Genius 13335 points

Hello Matsumoto-san,
Can you clarify what the issue seems to be? The attached PDF simply shows the switching distance curve which is one of the outputs of the tool.
Thanks!
Luke

0 Hirotaka Matsumoto over 6 years ago in reply to Luke LaPointe

Guru 27525 points

Luke san

Thank you for your reply!
About the issue, please refer to the attachment file.
20180223_LDC0851.pdf

Kind regards,

Hirotaka Matsumoto

0 Hirotaka Matsumoto over 6 years ago in reply to Hirotaka Matsumoto

Guru 27525 points

Luke san

If you have some update, could you let us know?

Kind regards,

Hirotaka Matsumoto

0 Luke LaPointe over 6 years ago in reply to Hirotaka Matsumoto

TI__Genius 13335 points

Hello Matsumoto-san,
Thanks for the attachment, it does look like the tool is not exporting the correct plot. I will re-assign this thread to the Webench team to take a look.
Regards,
Luke

0 Pradeep Chawda over 6 years ago in reply to Luke LaPointe

TI__Intellectual 995 points

Hello Matsumoto-san,

We are looking in to the issue.

Regards,

Pradeep

0 Hirotaka Matsumoto over 6 years ago in reply to Pradeep Chawda

Guru 27525 points

Luke san, Pradeep san

Thank you for your reply.
We are looking forward to your modification.
After modification, could you notice us?

Kind regards,

Hirotaka Matsumoto

0 Pradeep Chawda over 6 years ago in reply to Hirotaka Matsumoto

TI__Intellectual 995 points

Hi Matsumoto-San,

We have found the issue and we are in process of fixing it. We will notify you when we release the fix.

Regards,
Pradeep

0 Hirotaka Matsumoto over 6 years ago in reply to Pradeep Chawda

Guru 27525 points

OK, we are waiting for your reply.

0 Pradeep Chawda over 6 years ago in reply to Hirotaka Matsumoto

TI__Intellectual 995 points

Hi Matsumoto-San,

We are expecting a fix to be released by end of April.

Regards,
Pradeep

0 Hirotaka Matsumoto over 6 years ago in reply to Pradeep Chawda

Guru 27525 points

Pradeep san

OK, we are wait for your fixing.

Kind regards,

Hirotaka Matsumoto

0 Pradeep Chawda over 5 years ago in reply to Hirotaka Matsumoto

TI__Intellectual 995 points

Hi Matsumoto San,

The issue has been fixed and released to production. You should be able to download the pdf chart now.

Regards,
Pradeep

0 Pradeep Chawda over 5 years ago in reply to Hirotaka Matsumoto

TI__Intellectual 995 points

Hi Matsumoto-San,

The issue has been fixed.

Regards,
Pradeep

0 Hirotaka Matsumoto over 5 years ago in reply to Pradeep Chawda

Guru 27525 points

Pradeep san,

Thank you so much for your support.

Sensors

Sensors forum

WEBENCH® Tools/LDC0851: LDC0851 with coil designer