• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 576 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

LDC1614EVM: LDC1614EVM

LDC1614EVM: LDC1614EVM

Dineshkumar Dhanapal
Prodigy 15 points
Part Number: LDC1614EVM
Other Parts Discussed in Thread: LDC1614

Hi - We have procured LDC1614EVM board and installed the Sensing Solutions EVM GUI . The interface this board to PC was successful and able to read the inductance value. The datalogging is concerned , we couldn't see the timestamp of the measurements in the logged file , instead it is showing some numeric value that has incremented by one for all the measurements ( Refer the First column "x"). 

Can we know , whether the datalogging with timestamp feature is not available for this GUI? If so , what would be the solution for logging the data with proper timestamp.

Also can we get the labview GUI for communicating the LDC1614 EVM and datalogging. Please do the needful.

  • 0
    TI__Genius 17440 points
    Hi Dineshkumar,

    The numeric value associated with the measurements is simply the sample number. The timestamp can be calculated using the equation for conversion time (equation 7) on page 39 of the LDC1614 datasheet.

    I can provide you with the example Labview code in a private message.

    Regards,