TI doc describe the Wx can be calculated by the formula below, N=64 so that means the Wx resolution is about 360/64=5.625 degree, so the resolution is not good enough, is that means we still need to do some post process for example to calculate the more accurate angle by using phase-comparison monopulse method?
I see what the problem is with the part number you used. You have AR1642, should be AWR1642, that's why I could not find them! I will change the SUBJ on all four threads you posted so the correct part number is referenced.
In reply to LeonardEllis:
In reply to chianan chang:
In reply to Vivek Dham:
According the Wx formula, if Kmax is interger and N=64, the resolution of the Wx =360/64 =5.625 degree, and seems it is not relate to the SNR.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.