IWR1443BOOST: parameter configuration in TIDEP-0091?

The parameter configuration is hard-coded as constants in the source header file demo.h:

#define DEMOCFG_SAMPLE_RATE            7500        /* 7.5Msps */
#define DEMOCFG_FREQ_SLOPE             592         /* x 48.28kHz/us = 30.3Mhz/us */
#define DEMOCFG_IDLE_TIME              1600         /* 7us */
#define DEMOCFG_ADC_START_TIME         700         /* 7us */
#define DEMOCFG_RAMP_END_TIME          13933       /* 130us */
#define DEMOCFG_RANGE_RES              0.0385
#define DEMOCFG_NUM_ADC_SAMPLES        985
#define DEMOCFG_FFT_SIZE               1024

Sorry about that, this is a case of tweaking the parameters and forgetting to update the comments. The corrected lines:

#define DEMOCFG_FREQ_SLOPE 592 /* x 48.28kHz/us = 28.5Mhz/us */
#define DEMOCFG_IDLE_TIME 1600 /* 16us */
#define DEMOCFG_RAMP_END_TIME 13933 /* 139us */