This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/AFE4404EVM: AFE4404 sample rate

Part Number: AFE4404EVM

Tool/software: Code Composer Studio

Is it possible to set the AFE4404 sample rate externally by starting the conversion (and stopping ) for each sample at a rate determined by another device?  It seems the sample codes only set the sample rate and "wait" for ADC_Ready.

Thanks

1 Reply

  • Hello Bob,

    No it is not possible to trigger start and end conversion using an external signal in AFE4404.

    Regards

    Praveen

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.