Hi. TI
During the development of the OPT8241-EVM-CDK, the firmware upgrade test is in progress.
The firmware upgrade process is shown below.
1. Firmware upgrade from TI homepage to OPT9221_0V26.tie file
2. After upgrading the firmware, please contact the E2E site after restoration to 0V23.
3. I upgraded the firmware to OPT9221_0V23.tip included in VoxelSDK-0.6.7, but it does not work.
4. LED D3 does not turn on in EVM KIT and VoxelViewer can not see stream.
I want to know how to restore the board.
I also want to know the firmware version that I need to apply to the mass production PCB after development.
I attach a picture of the current EVM KIT status.
I will wait for your reply.
Thanks.
Best Regards,
Tyler