OPT3101: OPT3101

eli

Guru 13485 points

Part Number: OPT3101

Is the OPT3101 cam be used to measure distance of 0.3-10meter, with resolution of +- 1mm?

over 5 years ago

0 Alex Bhandari-Young over 5 years ago

TI__Mastermind 25815 points

Hi Eli,

Please use the system estimator tool available at www.ti.com/.../toolssoftware to simulate this.

Best,

Alex

0 eli over 5 years ago in reply to Alex Bhandari-Young

Guru 13485 points

Hi Alex
Why you cant advise if it possible or not?
If positive,what needed?
B.Regards
Eli

0 Alex Bhandari-Young over 5 years ago in reply to eli

TI__Mastermind 25815 points

Hi Eli,

I think we had some miscommunication since we are having the same discussion now on E2E that we already had over email. I will paste my response here for your convenience. Please refer to our email chain as well, since there is some additional there that would be helpful.

I can provide some guidance and help, but they will need to select the optics that works best for their system and requirements. There are also safety factors such as eye safety that they will need to evaluate on their own.

Best,

Alex

Sensors

Sensors forum

OPT3101: OPT3101