This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: PGA900EVM
Tool/software: Code Composer Studio
I am using PGA900EMV development board and Code Composer Studio v7. I want to use XDS200 USB JTAG emulator to program PGA900. Problem I have I can't build project from existing code example ( PGA900FirmwareGeneric-1p5) which is was build using CCS v5. PGA900 Software Quick Start Guide (SLDU015A) doesn't help me.
Any suggestions how to build project using CCS v7? Where to get CCS v6?
Previous versions of CCS can be downloaded here:
The main issue is usually related to using a version of the ARM compiler that is too far removed from the original version. In the software guide, the compiler version is 5.2.6. To download this version you must go to "Help" -> "Install new software".
Select "All available sites" in the "Work with:" field. Deselect "Show only the latest versions of available software" and type "cgt" in the search field. Follow the screenshot below and install 5.2.6 or up to 5.2.9. You must then follow the steps in the software user's guide to copy the files to the correct folders.
Sensor Signal Conditioning Applications
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Scott Cummins:
Thank you for answer.
Using older version (CCS v6) is fine for product evaluation, but not for new designs.
I have started CCS v7 by fallowing Quick start guide (SLDU015A). I am using PGA900EVM, XDS200 and USB2ANY boards.
Manually created folder in this location : C:\ti\ccsv6\tools\compiler\ ti-cgt-arm_5.2.6\lib\ and copied rtsv6M0_T_le_eabi.lib file. Compiled project successfully but I can't connect to target. I have errors:
Cortex_M0_0: Can't Run Target CPU: (Error -1268 @ 0x1080001) Device is locked up in Hard Fault or in NMI. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and /or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 220.127.116.11)
Why I am getting these errors? How to program PGA900 using CCS v7?
In reply to Irmantas Budrys:
Just wanted to add...
Installed CCS v6, fallowed SLDU015A document until it gave me error that I need a license for XDS200. What kind of license do I need? It is nothing mentioned in SLDU015A document about license.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.