TMP275 / Timing requirement

Sho Ogane

Other Parts Discussed in Thread: TMP275

Hi all.

The datasheet of TMP275 changes revisionE (NOVEMBER 2015) from revisionD (August 2007) .
I check the timing requirement sheet,
Please tell me the reason why the timing requirement changed.

Best Regards,
Sho Ogane

over 8 years ago

0 Aaron Heng over 8 years ago

TI__Mastermind 31600 points

Hi Sho-san,

I will investigate this, and get back to you.

Aaron

0 Sho Ogane over 8 years ago in reply to Aaron Heng

Genius 5575 points

Hi Aaron san

Thank you for the reply.
OK! I wait the result of the survey.

Best Regards,
Sho Ogane

0 Ren Schackmann over 8 years ago in reply to Sho Ogane

TI__Mastermind 35895 points

Hi Sho-san,

The timing requirements were updated as part of an effort to improve our datasheets. The device silicon was not changed. The new values reflect characterization of production devices using our latest tools and standards for timing validation.

Ren

Sensors

Sensors forum

TMP275 / Timing requirement