TMP75C: Shutdown current of TMP75C when Serial bus inactive.

weiji jiang

Expert 2040 points

Part Number: TMP75C

Hi TI Folks,

Good day to you.

I am confusing on the shutdown current of TMP75C when Serial bus inactive. Please teach the details on typical 0.3uA and Max 8 uA.

And correct me if my below understand is wrong:

Best regards

Jiang WeiJi

over 7 years ago

0 Ren Schackmann over 7 years ago

TI__Mastermind 35895 points

Hi Jiang,

The typical specification of 0.3uA represents room temperature measurement. See the note at the top of the table Section 6.5 Electrical Characteristics. See also Figure 2 on Page 6 for over-temperature behavior.

Ren

0 weiji jiang over 7 years ago in reply to Ren Schackmann

Expert 2040 points

Hi Ren,
Good day to you.
Thanks for your information.

best regards
Jiang WeiJi

Sensors

Sensors forum

TMP75C: Shutdown current of TMP75C when Serial bus inactive.