AFE5809EVM: Working with TSW1405EVM

Beatriz Otero

Part Number: AFE5809EVM

Hello,

I'm trying to interface the AFE5809EVM with the TSW1405EVM and if I understood well it can be done but only in 12-bits mode and having the correct .ini file. Would it be possible to send it to me please? email: botero@slb.com

Thanks and regards,

Beatriz Otero

over 6 years ago

0 Praveen Aroul over 6 years ago

TI__Mastermind 49176 points

Hello Beatriz,

We are no longer actively supporting the TSW1405EVM with our AFE58xx devices. We recommend the TSW1400 instead.

0 Beatriz Otero over 6 years ago in reply to Praveen Aroul

Prodigy 40 points

Hello,

Thank you for your answer! I actually bought now the TSW1400 and I'm starting testing my AFE5809EVM, but I'm having an issue with my channel 1. When testing with the ramp pattern, channels 2 to 8 behave exactly like they should, but my channel 1 is very noisy (see attached picture)

Do you have an idea on the cause of the problem I'm having?

Thanks and regards,

Beatriz Otero

0 Praveen Aroul over 6 years ago in reply to Beatriz Otero

TI__Mastermind 49176 points

Hi Beatriz,

I am assuming you were able to figure this one out by yourself.
I am closing the thread for now.
Please let us know if the issue still persists.

0 Praveen Aroul over 5 years ago

TI__Mastermind 49176 points

Hi Beatriz,

Please send an email to praveen.aroul@ti.com if you were not able to resolve the issue.

Sensors

Sensors forum

AFE5809EVM: Working with TSW1405EVM