TDC1000-GASEVM: GUI Correct settings

Marcelo Frimino

Part Number: TDC1000-GASEVM

I have problem to getting start with the tdc1000-gasevm module in flow mode

Can you send me correct module settings with the following terms ?
Piezo : 200khz
distance between the two peizos is 10 cm

please help me

0 Scott Cummins over 6 years ago

Hi Marcelo,

I recommend starting by reading through the EVM user's guide (www.ti.com/.../sniu026a.pdf) and the FAQ (e2e.ti.com/.../3611.everything-you-need-to-know-for-ultrasonic-tof-liquid-coupled-collateral-tools-designs-faq) to familiarize yourself with the different settings available and how they work. This will allow you to choose the correct settings to get the best results with your specific application.

Regards,

Sensors forum