This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

RTOS / TDC7201-ZAX-EVM:TDC7201 zax-evm cannot be measured

Prodigy 80 points

Replies: 3

Views: 67

Part Number: TDC7201-ZAX-EVM

Tool/software: TI-RTOS

I have successfully connected TDC7201GUI, but I have been unable to start measurement. My signal generator is not tektronix but DDS. Is there any difference between taike's INPUT and DDS's EXIT (IN)? DTG_TRIGG must be used?

  • Xiuxiu,

    Please let me know what is the DDS? This EVM works with a signal generator.
    Also we should provide the TRIGG, please refer to the TDC7201 datasheet for information on the timing.

    ---------------------------------

    Bharat Aravamudhan

    Sensor Signal Conditioning Applications

  • In reply to Bharat Aravamudhan:


    Ok, that's a signal generator. The name is abbreviated as: DDS

  • In reply to xiuxiu mao:

    I am closing this thread since you have started another thread for this discussion.

    ---------------------------------

    Bharat Aravamudhan

    Sensor Signal Conditioning Applications

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.