Part Number: PGA970
Can anybody an help me in below issue. I am using PGA970EVM board.
How can I read ADC data from DEMOD1_DATA1, DEMOD1_DATA2, DEMOD1_DATA3, DEMOD1_DATA4 ?
Thanks and Regards
The PGA970EVM GUI user's guide (http://www.ti.com/lit/ug/sldu023/sldu023.pdf) gives instructions for how to use the ADC Settings page.
In short you have to enable the VREF buffer, turn on the Analog Power, enable DEMOD1, Test Mux Enable, and the Interfaces & Deci Clk, and finally make sure the Sigma Delta Modulators and the Modulator Clock are set to "Not Reset".
Then you can click "Read ADC" below the ADCx data table and the values will populate in the table.
Precision ADC Applications
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Scott Cummins:
I am trying to generate the sine wave through firmware for 50Hz frequency.
what are the hex value should we pass to generate sine wave for accurate as well as stable primary excitation output.
I only want the hex value table.
In reply to Vai:
I'm not sure I understand. Your latest question seems unrelated to the original question of this post. Was your original question answered? If so, and this is a new question please let me know and I can split this off into its own thread.
My first question was not able to read ADC value through firmware not PGA970 GUI software.
I am using PIC controller to read data through SPI of PGA970 .
Please help me to how to read data through SPI also please answer the above query also.
Reading through PGA970 GUI software has been done now current i am working on firmware.
Kindly give solution as soon as possible,
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.