Part Number: IWR6843
Light curtain for hand protection devices are sil2 devices. and the resolution of that devices are 30mm. I wonder if we can use mmwave in place of light curtain(hand protection)? can we create 2d scan zone?
Also is there a SIL-2 version of iwr6843boost card?
I'll need to discuss this with my team, we should have an answer for you next week.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Akash Gondalia:
ok. thank you. i wait for your feedback.
In reply to user5223470:
Our IWR6843 devices are targeted for SIL-2.
Need some more clarification on 30 mm resolution requirement: Is it min. distance from sensor, or min. distance b'n two objects to distinguish them apart or are you referring to accuracy.
In reply to Yogesh Siraswar:
Thank you for your answer.
Please check the explanation
Resolution (R) is also called Minimum Object Sensitivity (MOS) or Detection Capability. This is the smallest diameter (object) that a safety light curtain system is capable of detecting with absolute certainty. This figure describes the resolution of the safety light curtain system:
R = P + E where:
P = distance between the axis of two adjacent beams. E = diameter of the beams.
By the way i need to correct my question. The light curtain's safety category is SIL1(categori 2 PL c) not SIL2 for my application. And the minimum resolution is 20mm not 30mm.
We are still looking into it. Will come back in a day.
You may need to carry out experiment similar to:
This will be clearly tell if your requirement will be met or not with the restrictions you may have.
Let me know if you need any support in running the experiments or have any concerns.
Thank you for your support. I have checked the link you gave me. I guess iwr1443 and iwr6843 are working as an area scanner. Defining a 2d scannig area is not possible.like the image seen below.
Could you tell me the response time for the out of box application. and can i use the same code(out of box code) with sil-2 iwr1443/iwr6843?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.