This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: IWR6843ISK
Tool/software: Code Composer Studio
I have the IWR6843 board, and i want to use it with mmwave industrial toolbox 3_3_1 lab 20.
At the past i used to use debug mode at previous board of the mmwave.
I experience difficulties when trying to use lab20 at the mentioned toolbox at debug mode.
The lab20 has two sub projects.,both passed compilation.
In order to deal at debug mode,i did the following:
1.load jumper on SOP2
3.power cycle of the board
4.start burning the C:\ti\mmwave_sdk_03_01_01_02\packages\ti\utils\ccsdebug\xwr68xx_ccsdebug.bin
5.it passed successfully->removing the jumper from the SOP2
6.CCS->compiling the projects DSS MSS->successfully
7.creating target configuration file->load the resulting file->gather files to group->connect to target
8,when connecting to target ,the CCS gets stuck.
I've attached the relevant screenshots.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Akash Gondalia:
In reply to gil albo:
All the pictures that i've attached above show the situation.
here are the messages again:
I'm using the IWR6843ISK with lab20 which from the mmwave toolbox 3_3_1
i have the latest mmwave SDK mmwave_sdk_03_01_01_02
the projects MSS and DSS passed compilation.
I've flashed the ccsdebug of the IWR6843 successfully and removed the SOP2 jumper afterwards.
created new target configuration file when selecting only the IWR6843 and XDS110 USB debug mode.
I've saved this ccxml file.
then clicked on the test connection button ,and the result is:
[Start: Texas Instruments XDS110 USB Debug Probe]
Execute the command:
%ccs_base%/common/uscif/dbgjtag -f %boarddatafile% -rv -o -S integrity
-----[Print the board config pathname(s)]------------------------------------
-----[Print the reset-command software log-file]-----------------------------
This utility has selected a 100- or 510-class product.
This utility will load the adapter 'jioxds110.dll'.
The library build date was 'Jan 24 2019'.
The library build time was '14:27:46'.
The library package version is '8.0.903.6'.
The library component version is '22.214.171.124'.
Then ,I launched that target file ccxml and grouped the two
then , a message appear:
when clicking updated, the device is stuck forever.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.