Sensors

Sensors forum

State Resolved
Locked Locked
Replies 6 replies
Subscribers 31 subscribers
Views 338 views
Users 0 members are here

Support feedback

Options

Options

Similar topics

PGA302EVM-037: Win 10 driver

Mario Schirmer

Intellectual 360 points

Part Number: PGA302EVM-037

Hi,

my laptop can´t find the PGAxxxEVM-037 board. I think it´s an driver problem. I can´t see the board in the device manager. (Diode D2 is off and the PWR Diode is lighting.)

Could somebody send me a link to the driver.

I´ve got Win10 64Bit Prof

Regards

Mario

over 4 years ago

0 Scott Cummins over 4 years ago

TI__Mastermind 31655 points

Hi Mario,

I will see if we have a specific driver for this, but typically the computer should recognize the MSP430 on its own. Do you have a copy of Code Composer Studio installed?

Regards,

0 Mario Schirmer over 4 years ago in reply to Scott Cummins

Intellectual 360 points

Hi Scott,

I have CCS 6.2.0 installed.

PWR Led is lighting, The LED D2 is off. (In the first Minutes the LED D2 was on, but now its always OFF)

Regards,
Mario

0 Mario Schirmer over 4 years ago in reply to Scott Cummins

Intellectual 360 points

Hi Scott,

Do you have a solution for this issue ?

Regards

Mario

0 Scott Cummins over 4 years ago in reply to Mario Schirmer

TI__Mastermind 31655 points

Hi Mario,

Because of the operation of the LED as you described, it seems like the MSP430 on your EVM has been damaged somehow. To clarify, what is currently the setting of the J9 jumper?

Regards,

0 Mario Schirmer over 4 years ago in reply to Scott Cummins

Intellectual 360 points

Hi Scott,

the currently postion of the Jumper is: Pins 2-3 Closed.

Regards

Mario

0 Mario Schirmer over 4 years ago in reply to Mario Schirmer

Intellectual 360 points

Hi Scott,

I got a new EVM and it works...

THX
Mario