Sensors

Sensors forum

State Resolved
Locked Locked
Replies 7 replies
Answers 1 answer
Subscribers 31 subscribers
Views 464 views
Users 0 members are here

Support feedback

Options

Options

Similar topics

IWR1443BOOST: Uniflash can't flash the image to the mmWave EVM

XinRui Jiang

Prodigy 140 points

Part Number: IWR1443BOOST
Other Parts Discussed in Thread: IWR1443

According to the operating instructions, I can successfully complete the demonstration of demo Visualizer, but if I replace the .bin file with other experimental .bin files in industrial toolbox, I can't write it. I have been reporting error: [ERROR] Cortex_R4_0: !!! Aborting flashing of specified files!!!

How can I solve this? Thank you.

over 4 years ago

0 Charles Oladimeji over 4 years ago

TI__Mastermind 33805 points

Hi,

Are you trying this with other .bin files specific to the IWR1443? There are various bin files in the toolbox for various devices.

Regards,

Charles O

0 XinRui Jiang over 4 years ago in reply to Charles Oladimeji

Prodigy 140 points

Yes,I have tried other .bin files in the toolbox,the problems are the same as what i said before.And I tried the toolbox 3.4,toolbox 3.0 and toolbox 2.5,but they didn't work either.But the .bin files in SDK 2.1 can flash. I can't find the way to solve the problem,need your help,thanks

0 Charles Oladimeji over 4 years ago in reply to XinRui Jiang

TI__Mastermind 33805 points

Can you confirm that the binary you are trying are for the IWR1443 device?

0 XinRui Jiang over 4 years ago in reply to Charles Oladimeji

Prodigy 140 points

yes,I'm sure.The labs I tried are both labeled as -14xx. I can't figure out what's wrong with my operation. thanks

0 Charles Oladimeji over 4 years ago in reply to XinRui Jiang

TI__Mastermind 33805 points

What SDK version are you using? and What version of the chip (ES1, ES2 or ES3) ?

0 XinRui Jiang over 4 years ago in reply to Charles Oladimeji

Prodigy 140 points

My SDK version is 2.1 ， my chip is ES3.0 and the version of Industrial toolbox is 3.4. Should I change the version? Thanks.

0 Charles Oladimeji over 4 years ago in reply to XinRui Jiang

TI__Mastermind 33805 points

Hi,

There are certain demos in the labs that do not support ES3, the top level page of the TI resource explorer shows this.

http://dev.ti.com/tirex/explore/node?node=ANNtaxZONu0PbSaUU.YiPQ__VLyFKFf__LATEST

Also some other thread with similar issues that were resolved

https://e2e.ti.com/support/sensors/f/1023/t/756667?IWR1443BOOST-I-cant-program-IWR1443BOOST-with-any-demo-like-High-Accuracy-Range-Measurement-by-UniFlash

https://e2e.ti.com/support/sensors/f/1023/t/740781?RTOS-IWR1443BOOST-ISSUE-Flashing-IWR1443Boost-with-demo-software

Regards,

Charles O