This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TS3A225E
We have implemented in our design the two following components (see schematic in attachment)
We are confused to observe we are losing the register settings of the TS3A225E.
Writing and reading immediately the values back is ok but after 100ms most of the time the values are lost.
PS: the TLV320AIC3100 on the same I2C bus is working correctly
Could you advise?
In reply to Forrest Zhang:
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Adam Torma:
Adam,After apply some software WORKAROUND patches, the chip works fine.Therefore, I don't plan to any more test on it.
Issue 1: Insert a delay after interrupt trigger, then it's succuessfully to query IC.Issue 2: Although the reason is unknown, just rewrite the configuration after headset removed, then it works.Issue 3: Just be confused by the headset present definition.SincerelyForrest
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.