This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TS3DS10224
For this part its mentioned that it could be used for USB, which would mean 5v support, but unfortunately max voltage is 4v. We were planning to use it for CAN bus lines, but actually in the spec max voltage supported should be 7v. Could you advise me an alternative part number that supports higher voltage up to 7v?
The TI.com switch search tool is a good way to find parts that meet your requirements. I filtered the tool for 2:1 devices that will support > 7V. What do you think about the CD4053?
What is the data rate for your CAN signal and how many transmit or receive lines do you need 2:1 switching?
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Adam Torma:
Thanks for the suggestion. The problem is that max Vcc I can provide is 4.5V. And in the suggested switches Vio is always tied to Vcc. Is there any switch where Vio could be higher than Vcc?
The speed is 1Mbps and we would need 2 lines.
Thanks and regards,
In reply to Sergey Vladimirov:
thats the limitation of our current design. We can either use input voltage which is up to 28V or use voltage after converter which is 4.5V.
I'm thinking of going with this one in the end: TS5V330.
What do you think?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.