This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hey Adam, just one more little question: Do i need to terminate my differential lines coming from a 50 Ohm source interfacing with the TS3L110? So for instance a 100 Ohm differential termination at the TS3L110 input. My maximum frequency is 100MHz. i am still not sure I understand how the switch works, assuming it would only work as a resistor (Ron approx. 8 Ohm) I would not need termination. But I hardly believe that. But on the other hand, i don't see any datasheet entry for input or uptut resistance... so what is this black magic switch? ;) bestr regards Benjamin
Here are a few resources to help you understand how passive FET switches perform their black magic.
Below are some excerpts from Selecting the Right Texas Instruments Signal Switch
Below is an excerpt from the signal switches e2e frequently asked questions FAQ page:
Let me know if you have other questions about solid state signal switch black magic. I may be working on updating some of this material and may be able to help point out what is not clear about these documents.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Adam Torma:
In reply to Benjamin Brammer36:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.