This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TS5A22364-Q1
My schematic is that input is COMx and out is NOx, but in is NOx and out is COMx in datasheet.
Is it allowable from COMx to NOx?
VCC=3.3V and signal range is ±2V.
5V Pull-up is placed on NO1 for MIC signal diagnostic. I'm concerned that 5V PU could distort MIC signal.
Does this make any distort on MIC signal?
If it could distort MIC signal, what about placing bypass capacitor in series to remove the DC bias?
COM and NO/NC are interchangeable and bidirectional. You can consider either COM or NO/NC as input. You can imagine the TS5A22364-Q1 is a resistor when the internal switch is closed, which it allows the COM and NO/NC connected.
I am assuming your 5V pull-up scheme is to bias your -2V to positive. TS5A22364-Q1 does not require you do so. When Vcc is 3.3V, it allows -2.2V ~ 3.3V to pass through without any DC bias.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.