This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: SN74CBT3257
I just want to double check for customer's schematics.
One of the SN74CBT3257 were using 3 channel for SPI de-multiplexer, 1 channel for GPIO multiplexer in the same chip, I think it's ok, correct me if wrong.
A bypass 0.1uF is suggested to add for both device Vcc pin, correct?
Anything else, feel free to add comment, thanks a lot!
All 4 signal paths are the same in the SN74CBT3257 so you may support multiple types of signals in a single IC.
I'm guessing the issue you may be concerned with is the clock signals crossing onto the GPIO? The SN7CBTXXXX devices have ~-53dB of cross talk performance so you should no have much of an issue.
Something you should also be aware of is the SN74CBTXXXX devices are single FET switches and will not pass signals from 0V to Vcc but 0 to ~Vcc-1 V. Usually this is not an issue because the transmitter and receiver Vih and Vil thresholds are not close to Vcc.
Looking at the schematic:
Vcc = 5V which is within the recommended operating conditions. It is standard practice to place a bypass capacitor as close to the Vcc pin as possible
OE is pulled low by default which will enable all the signal paths
S pin does not have a default pull up or pull down so there cannot be a guaranteed signal path that is selected during power up
Please ensure the voltages on the signal path are within the recommended operating conditions and that your system does not require a Vih value of > 4V
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.