This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TS5A3159
I am using the TS5A3159 part with Vcc = 5.5V. I had a situation where pin 6 (IN) was left floating while Vcc = 5.5V. High current draw was observed. Once pin 6 was connected to 5V the current draw was observed to be normal. Will the parts function as normal after having pin 6 floating on a few brief occasions with the parts powered on?
We always recommend that digital input pins like pin6 be pulled up to Vcc or ground to avoid the floating situation that causes high current consumption. This can be accomplished by a weak pull up or pull down resistor as seen in the application diagram.
You can also view this application note implications of slow or floating CMOS.
The brief high supply current will not damage the part if it is within the absolute maximum ratings for the IC. I don't think the current you are seeing with the floating digital logic pin is anywhere close to 100mA but that will be the current limit for the Vcc pin.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.