This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TS5A3160
Regarding with connection of TS5A3160, I would like to know whether it can be used as both cases below? The reason I would like to ask is because, pin function description mention that NO (Pin 1), NC (Pin 3) and COM (Pin 4) are Input/Output pins. For simplicity, I did not show GND pins, V+ pin and IN pins connections.
(A) Source is connected to COM (Pin 4) and depending on IN (Pin 6) logic level, either load 1 or load 2 will be given power coming from COM pin.
(B) Source 1 and Source 2 are connected to NO (Pin 1) and NC (Pin 3) respectively, and depending on IN (Pin 6) logic level, load will be given power by either source 1 or source 2.
Lastly, if TS5A3160 cannot achieve both, then, is there any other alternative IC to achieve both case A and B?
The TS5A3160 is a low power signal switch that is bi-directional and will connect the common pin (COM) to the Normally Open (NO) or Normally Closed (NC) pin based on the voltage applied to the control logic. This means it will work for both cases A and B as long as you operate within the recommended conditions.
Since you mention applying power to loads you must keep the current through the switch <200mA
In example B you also need to make sure that the device you use has the break before make feature so that you do not short your two supplies together.
The switches and multiplexers FAQ page is also great for more information on the usage of these devices.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Adam Torma:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.