This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TS3A44159
Customer now uses two TS3A44159 for analog audio signal as shown below in the original circuit. Now, for the purpose to reduce the pulse which cause pop-noise, they add an AC couple cap at the left TS3A44159 chip (see modified circuit.) But now, there's a side effect from this added AC couple cap: The output of the TS3A44159 at right side was clipped for the negative component.
The question here is,
Thank you for the detailed information. The negative clipping is expected for the TS3A44159 as it doesn't support passing negative voltage signals. TI's audio switch family is the TS5A2236X devices.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Adam Torma:
Regarding analog switch which support negative voltage that you mentioned above, they're all 2-ch chips. I can't find any 4-ch chip. Can you double confirm if we have it or not?
Besides, we're asked why we mentioned in datasheet that TS3A44159 can support audio signal but actually it does not support negative voltage. What would be your comments regarding this?
In reply to Antony Lin:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.