This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TS3A5018
-RaviSystems & Applications ManagerMUX & Signal Switches
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
The TS3A5018 has the voltage (3.3 V) and the bandwidth (200MHz) able to support the I2S signals.
The I2S is a low current digital signal so the voltage drop of the 10 ohm on-state resistance will not be an issue in the system. As Ravi mentioned above there is a newer TMUX1574 device that will fit well in this application.
Here is an example of the calculation.
In reply to Ravi Singh:
Thanks for your part suggestion.
In reply to Adam Torma:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.