This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

TS12A44514: Does this device have 2kV insulation voltage at open contact

Prodigy 20 points
pratik debnath

Part Number: TS12A44514

Dear,

Sir,

    I am Pratik Debnath using TS12A44514 analog switch.I want to know the isulation voltage of that switch in open condition.I want minimum 2Kv insulation voltage at open contact.

please reply and correct me.

Thanks

Pratik

Prodigy 20 points
pratik debnath
  • Mastermind 34700 points
    Adam Torma
    Pratik,

    The TS12A44514 is a passive FET switch and would not support 2000 V on the signal path for any significant duration other than an ESD type event. When the TS12A44514 is toggled to the off state the signal path will be Hi-Z in the ~1M ohm range but it will not support more than the recommended voltage 0 to Vcc.

    I think you may be looking for one of TI's isolation products like the ISO771.

    Let us know what you think about the Isolation device.

    Adam
  • Prodigy 70 points
    PRATIK DEBNATH

    In reply to Adam Torma:

    Dear,

    Sir ,
    I am looking for a digital isolator type switch.When there is no 2kv present i shall short two terminal for calibrate and open when 2kv is present.Switch is controlled by 3.3v microcontroller.
    So I choose  TS12A44514.PLease suggest right switch like digital isolator switch which can be operated on 3.3V and in open condition it gives 2KV isolation.
    Kindly suggest somthing.
  • Expert 8190 points
    Koteshwar Rao

    In reply to PRATIK DEBNATH:

    Hi Pratik,

    I do not think I understand your requirement very well, could you please describe a little more on why you need a digital isolator / switch for your application? How are you planning to use the device? For us to better understand your requirement and suggest the most suitable device, please let us know what is the end application and what is the device connected to on either side.

    If you have a simplified block diagram or shareable schematic, that would also help.

    A digital isolator is going to be a true isolator that separates one side from the other with an isolation voltage (VISO) of upto 5kVrms. For more details on TI's digital isolators, please refer to ISO7741 datasheet.


    Regards,
    Koteshwar Rao
  • Expert 8190 points
    Koteshwar Rao

    In reply to Koteshwar Rao:

    Hi Pratik,

    Please do share us more information as requested so that we can help you suggest the most suitable device for your requirements. If you think you already found a device for your requirement, then we can close this E2E post and consider it resolved. Let me know, thanks.


    Regards,
    Koteshwar Rao

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Terms of Use of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Terms of Use of this site. TI, its suppliers and providers of content reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.

TI Worldwide | Contact Us | my.TI Login | Site Map | Corporate Citizenship | mobile m.ti.com (Mobile Version)

TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.

© Copyright 1995-2018 Texas Instruments Incorporated. All rights reserved.
Trademarks | Privacy Policy | Terms of Use