I’m currently developing a test setup where the TS3USB30E could be a good fit. However, we are wondering whether TI also has devices available which have an even lover Ron?
Most important factors I care about are the following:
- USB 2.0
- High Bandwidth
- Package which can be soldered by Hand
Roland,
I looked at the signal switch selection tool on TI.com and filtered on USB 2.0 switches in the additional features parameter and then sorted by Ron. It looks like the TS3USB221A, TS3USB221E, and TS3USB3000 has lower Ron than the TS3USB30E.
You can use this post to help look at the comparison between the 1:2 USB 2.0 switches.
Thank you,
Adam
