Part Number: TS3DS10224
Note 4 refers to the input and output clamp-current ratings. I don't see them specified anywhere on the spec sheet.
In my application, there will be short term conditions when an ac coupled input or output will be above or below the supplies. I am trying
to make sure that I limit the current in those cases to what is legal. A different part in this family, the TS3DV621, lists the clamp currents at 50mA.
Is it reasonable to assume the same for this part?
This device is a part of the TS3USB221 family of switches. I would suspect the clamp current rating for the TS3DS10224 will be similar to the TS3USB221 family at 50mA. I have put a request into our design team to confirm my theory.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.